No.517 Máy kiểm tra va đập rơi DU PONT loại

JIS (K5400), K5600-5-3, ASTM D2794(Plastic), ISO 6272

  • This tester is used to evaluate the falling weight endurance on coated film and point impact strength for plastic film.
  • Attaching the test specimen between the die and the punch, the operator is to drop a weight from a certain height.
  • After the weight has been dropped the operator is to check for transformations, cracks, and peels caused by the impact.
  • The tester can also be assorted with a low temperature oven (L type).

Specification

No.517/No.517-L

Specifications are subject to change without notice.
Falling Height 50 to Max. 500 mm (Pitch 50 mm) 50 to Max. 1,000 mm (Pitch 50 mm)
Falling Weight 300 g, 500 g and 1,000 g 1,000 g, 2,000 g
Punch R1/16″, R1/8″, R3/16″ and R1/4″ φ1/2″ and φ0.625″
Die R1/16″, R1/8″, R3/16″ and R1/4″ φ0.64″
Test Plate Steel Plate, 200 × 100 × T0.6 mm ―

No.517 DU PONT TYPE FALLING IMPACT TESTER

Specifications are subject to change without notice.
Dimensions/ Weight (Approx.) W500 × D300 × H840 mm, 45 kg W500 × D300 × H1,350 mm, 50 kg

Reviews

There are no reviews yet.

Be the first to review “No.517 Máy kiểm tra va đập rơi DU PONT loại”