No.254 Máy kiểm tra độ uốn phích cắm

JIS C3662-2, C8306, IEC-60227-2

  • This tester is used to test the bending endurance of plugs. Hanging prescript weight on one end of the plug and repeatedly bending the other end 60° back and forth for a prescript number of times.
  • After a prescript number of times the plug has been bended, the operator is to check the disconnection rate of the plug to determine the bend stress strength.
  • Also, to test chloride insulating cables, the plug will be flexed left and right repeatedly at a 90° angle.

Specification

Specifications are subject to change without notice.
Hangings 1, 2, 3, or 4 Hangings (4 kinds)
Flexing Angle Left-Right 60°, 90° (2 Stage Type)
Flexing Speed 40 times/min (20 rt/min)
Weight 500 g
Bracing 300 mm from Pivot, Spacing 40 mm
Counter 6 Digits Preset Counter
Option Conduction Device
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.) 1 Hanging : W470 × D505 × H760 mm, 43 kg

Reviews

There are no reviews yet.

Be the first to review “No.254 Máy kiểm tra độ uốn phích cắm”