No.170 MÁY KIỂM TRA ĐỘ DẺO XOẮN CLASH-BERG (THỦ CÔNG)

JIS (K6734), (K6745), K6924-2, ASTM D1043, ISO 458

  • This tester is used to measure the softening temperature of plastic.
  • The test specimen is to be attached to the upper and lower Chucks of the tester and then dipped into water which the temperature is raised at a constant speed.
  • At every 5 °C the water temperature has rises, the operator is to leave the test specimen untouched for 3 minutes.
  • After the 3 minutes have passed, twisting torque is to be added to the test specimen so that the rigidity coefficient can be calculated from the twisting angle.
  • The softening temperature will be acquired from the temperature-rigidity coefficient curving line.

Specification

Specifications are subject to change without notice.
Model No.170 CLASH-BERG TORSION FLEXIBILITY TESTER (MANUAL)
Specime W6.35 ± 0.03 mm, L64 mm, T0.8 to 1.5 mm
Chuck Distance 40 mm
Angle Scale 0 to 360° (Scale 1°)
*Max. Angle 270°
Temperature Range -60 to 100 °C (Dry Ice Cooling)
Heat-Up Speed 2 °C/min
Torque Device Pulley Type
Weight 5 g, 10 g, 20 g, 50 g
Software ―
Accessories Duwar Flask, Thermometer: 2 pcs, Specimen Cutter,
Notching Tool, Specimen Setting Gauge
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.) W300 × D400 × H900 mm, 36 kg

Reviews

There are no reviews yet.

Be the first to review “No.170 MÁY KIỂM TRA ĐỘ DẺO XOẮN CLASH-BERG (THỦ CÔNG)”