No.162-EW スリップテスター (エナメル線用)

  • This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding.
  • Fix 2 specimens parallel to one another onto the Sled and Inclination Board.
  • Put the tension to 2 specimens on the board. Set the Sled on the Board, making each specimen get crossed when the Angle is 0°.
  • Measure the Angle when the Mass starts sliding while the Board gets inclining at a certain speed. Static Friction Coefficient will be calculation as tanθ from the measured Angle.

No.162-EW Specification

Specifications are subject to change without notice.
Model No.162-EW No.162-EWD
Sled W120 mm, L120 mm, Mass 500 g W120 mm, L120 mm, Mass 500 g
Inclination Angle 0 to 90° (Scale 0.2°) 0 to 90° (Scale 0.2°)
Inclination Speed 0.5°/s 0.5°/s
Option Changeable Inclination Speed Spec Changeable Inclination Speed Spec
Power Source AC 100 V, 1-Phase, 3 A, 50/60 Hz (Motorized) AC 100 V, 1-Phase, 5 A, 50/60 Hz
Dimensions/ Weight (Approx.) W750 × D270 × H425 mm/ 30 kg W750 × D270 × H425 mm/ 30 kg

Reviews

There are no reviews yet.

Be the first to review “No.162-EW スリップテスター (エナメル線用)”