No.258 Máy thử va đập

JIS K7110、K7111-1、ASTM D256、D6110、ISO 179-1:2010、180

  • This pendulum type impact tester for plastic enables the operator to conduct both Charpy and Izod impact test just by changing the hammer and the anvil.
  • The tester can be attached with an optical rotary encoder, so that the impact data can be saved in a computer.

↑　DIGITAL/TP　TYPE

Specification may change without notice.
Main Body Dimensions W500 × D350 × H850 mm
(Digital Touch Panel Spec : D+250mm, Curtain for Littler Control : W+520mm,
Safety Cover : W + 500mm × H + 275mm)
Main Body Weight 125 kg
(Digital Ver. : + 5kg, Curtain for Littler Control: + 5, Safety Cover: + 75 kg)
Power Source Digital Type without Safety Cover、 AC 100 V, 1-Phase, 3 A, 50/60 Hz
Digital Type with Safety Cover 、AC 100 V, 1-Phase, 5 A, 50/60 Hz
Accessories Assortment of Tools

※ It is listed in the below orders.
・258 JIS/ISO
・258 ASTM

JIS/ISO（←open)
Standard JIS/ISO
Test Method Charpy Impact Test Izod Impact Test
Base Standards JIS B7739:2011、ISO 13802:1999
Reference Standards JIS K7111-1:2012、ISO 179-1:2010 JIS K71110:1999、ISO 180:2000
Hammer Capacity
※1(J)		 0.5, 1, 2, 4, 5 7.5, 15, 25※2 1, 2.75, 5.5, 11, 22
　Anvil JIS/ISO Charpy Anvil JIS/ISO/ASTM Izod Anvil
JIS/ISO Charpy Anvil Lift Necessary ー ー
Hammer Impact Point Setting Gauge JIS/ISO Hammer Impact Point Setting Gauge
Specimen Setting Gauge JIS/ISO Charpy Specimen Setting Gauge JIS/ISO  Izod Specimen Setting Gauge
Option Digital(Touch Panel, PC)Ver., Safety Cover(Full Cover),Curtain for Littler Control, Hammer Additional Weight,
Mini Printer (Thermal paper 10 rolls)※3, CSV Down load Tool(includes LAN cable)※4, Analog Scale & Pointer, Windows PC ※5, Additional Weight for Main Body ※6
Impact speed 2.9m/s 3.8m/s 3.5m/s
Lift-up Angle 150°
Hammer Edge R2±0.5mm、Angle：30±1° R0.8±0.2mm
Anvil Edge Radius R1±0.1mm ー ー
Anvil Supporting Edge ー R0.2±0.1mm
Anvil Supporting Length 62+0.05mm※7 ー
Anvil-Edge Distance ー R22±0.2mm
※1 Custom Hammers can also be provided. kgf/cm Hammers are also available.
kinds of additional weights can be attached to a single hammer.
※2 50J Hammer is not available.
※3 Setting Gauge differs depending on the size of specimen thickness.
※4 Available when Digital Touch Panel Spec. is chosen.
※5 Required for the CSV Download Tool for the Digital Touch Panel Type spec.,
and Digital PC Type spec.
※6 Required when more than 15 J Hammer is used.
※7 This length is for JIS K7111-1. If other lengths are required, please let us know.
ASTM（←open)
Standard ASTM
Test Method Charpy Impact Test Izod Impact Test
Base Standards ー
Reference Standards ASTM D6110-10 ASTM D256-10
Hammer Capacity
※1(J)		 2.7 or More
(Track Record: 0.5,1,2,4,5,7.5,15,25)		 2.7
(Track Record: 1,2.75,5,11,22)
　Anvil ASTM Charpy Anvil JIS/ISO/ASTM Izod Anvil
JIS/ISO Charpy Anvil Lift ー ー
Hammer Impact Point Setting Gauge ASTM Hammer Impact Point Setting Gauge
Specimen Setting Gauge ASTM Charpy Specimen Setting Gauge ASTM  Izod Specimen Setting Gauge
Option Digital(Touch Panel, PC)Ver., Safety Cover(Full Cover),Curtain for Littler Control, Hammer Additional Weight,
Mini Printer (Thermal paper 10 rolls)※3, CSV Down load Tool(includes LAN cable)※4, Analog Scale & Pointer, Windows PC ※5, Additional Weight for Main Body ※6
Impact speed 3.46m/s 3.5m/s
Lift-up Angle 150°
Hammer Edge R3.17±0.12mm、Angle：45±2° R0.8±0.2mm
Anvil Edge Radius R3.17±0.12mm
Anvil Supporting Edge ー R0.25±0.12mm
Anvil Supporting Length 101.6±0.5mm ー
Anvil-Edge Distance ー R22±0.05mm

※1 Custom Hammers can also be provided. kgf/cm Hammers are also available.
kinds of additional weights can be attached to a single hammer.
※2 50J Hammer is not available.
※3 Setting Gauge differs depending on the size of specimen thickness.
※4 Available when Digital Touch Panel Spec. is chosen.
※5 Required for the CSV Download Tool for the Digital Touch Panel Type spec.,
and Digital PC Type spec.
※6 Required when more than 15 J Hammer is used.
※7 This length is for JIS K7111-1. If other lengths are required, please let us know.

Reviews

There are no reviews yet.

Be the first to review “No.258 Máy thử va đập”