No.216-10kN Máy thử vật liệu vạn năng

  • This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber.
  • The tester capacity comes in either a maximum of 10 kN respectively.
  • The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage.
  • Tester control and tensile strength calculation are both conducted via touch panel interface.

Specification

Specifications are subject to change without notice.
Model No.216-10kN　UNIVERSAL MATERIAL TESTER
Test Load Max. 10 kN
Stroke 1,000 mm*
Test Speed 1 to 500 mm/min
Accessories Chuck shapes are to be consulted.
Options CSV Export Software, Extensometer
(Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm)
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.) W860 × D750 × H1,610 mm, 172 kg

* The Chucks/ Loadcell length is not included.

Reviews

There are no reviews yet.

Be the first to review “No.216-10kN Máy thử vật liệu vạn năng”