No.213 MÁY ÉP NHIỆT JIS

JIS Z1514, (Z1521), Z1707

  • This tester is used to heat seal cellophane, plastic film etc. according to the JIS standard.
  • The tester can provide accurate load by applying real load pressuring system.

Specification

Specifications are subject to change without notice.
Seal Plate 20 × 40 mm × 3 line or 20 × 180 × 1 line
Temperature Range Max. 300 °C
*The surface flatness will only be ensured at the specified temperature.
Pressing Method Weight Loading, Opening 8 mm
Load Pressure 49 to 294 kPa (0.5 to 3.0 kgf/cm2)
Timer Max. 99.99 sec
Accessories Foot Switch
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.) W750 × D350 × H670 mm, 65 kg

Reviews

There are no reviews yet.

Be the first to review “No.213 MÁY ÉP NHIỆT JIS”