No.208 MÁY KIỂM TRA ĐỘ MÀI MÒN CÁP ĐIỆN ÁP THẤP CHO Ô TÔ

JIS C3406, JASO, ISO 6722

  • This tester is to evaluate the abrasion resistance of low voltage cables for automobiles according to the abrading tape method.
  • Attaching the test specimen so that it touches the abrading tape and then the operator is to abrade the test specimen with the abrading tape at a prescript speed.
  • The abrasion resistance value that is acquired by this method will be the length that the abrading tape abraded before the electric conductor touches the abrading tape.

Specification

No.208（JIS）

Specifications are subject to change without notice.
Model No.208（JIS）
Specimen L900 mm
Weight Top R114 mm,
Initial 450 g, 1,350 g, 1,900 g
Electrode φ7 mm
Abrasive Tape Material A, Grit #180,
Conductive Pitch 150 mm,
Conduction W10 mm
Tape Speed 1,500 mm/min
Specimen Rotating Angle ―
Counter 6 Digits Preset Counter
Accessories Abrasive Tape: 5 pcs
Power Source AC 100 V, 1-Phase, 5 A, 50/60 Hz
Dimension/ Weight (Approx.) Tester Body: W620 × D400 × H510 mm, 50 kg
Control Box: W200 × D420 × H315 mm, 10 kg
W620 × D300 × H500 mm, 70 kg(LT)

No.208-JASO

Specifications are subject to change without notice.
Model No.208-JASO
Specimen L1 m
Weight Top R114 mm, Initial 0.63 ± 0.05 N
Additional Weight 50 to 1,500 g
Electrode φ6.9 mm
Abrasive Tape Material A, Grit #180,
Conductive Pitch 150 mm,
Conduction W10 mm
Tape Speed 1,500 ± 75 mm/min
Specimen Rotating Angle 0°, 90°, 180°, 270°
Counter 6 Digits Preset Counter
Accessories Abrasive Tape: 5 pcs
Power Source AC 100 V, 1-Phase, 5 A, 50/60 Hz
Dimension/ Weight (Approx.) Tester Body: W620 × D400 × H510 mm, 50 kg
Control Box: W200 × D420 × H315 mm, 10 kg
W620 × D300 × H500 mm, 70 kg(LT)

Reviews

There are no reviews yet.

Be the first to review “No.208 MÁY KIỂM TRA ĐỘ MÀI MÒN CÁP ĐIỆN ÁP THẤP CHO Ô TÔ”