No.181 Máy kiểm tra va đập màng phim

ASTM D3420

  • This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.
  • A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.
  • The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.

Specification

Specifications are subject to change without notice.
Model No.181　FILM IMPACT TESTER No.181-L　FILM IMPACT TESTER
(WITH REFRIGERATING MACHINE)
Capacity 0 to 1.5 Ｊ (Scale 0.05 J), 0 to 3.0 Ｊ (Scale 0.1 J) (2 ranges) 0 to 1.5 Ｊ (Scale 0.05 J), 0 to 3.0 Ｊ (Scale 0.1 J) (2 ranges)
Impact Head Hemispherical shape, R12.7 mm, R6.35 mm Hemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle 90° (Additional Weight type) 90°(Additional Weight type)
Specimen φ80 mm φ80 mm
Clamp Inner φ60 mm Inner φ60 mm
Temperature Range ― -35 °C to 60 °C (Refrigerator)
Option Digital Display Ver. Digital Display Ver.
Power Source ― AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions/ Weight (Approx.) W640 × D200 × H530 mm, 68 kg W1,060 × D1,530 × H1,210 mm, 340 kg

Reviews

There are no reviews yet.

Be the first to review “No.181 Máy kiểm tra va đập màng phim”