No.455 45° FLAMMABILITY TESTER FOR TXTILE

JIS A1322, L1091, L4404, Z2150

This tester is to used to test the flammability of textile products (curtains).
The A-1 (45° micro burner method) and A-2 (45° Meckel burner method) methods are to measure the degree of spread of the burn and the after-flame.
The D method is to measure the times it takes for the test specimen to completely burn out.
The tester can also be organized so that it can conduct the B method which is to measure the after-flame time and flaming distance.

Specifications are subject to change without notice.
Test Method	Standard Spec	B Method Spec (Surface Flaming Test)
Specimen	A-1 and A-2 Method: 350 × 250 mm D Method: W100 mm, Mass 1 g Attaching Angle: 45°	220 × 400 mm
Burner	A-1 and D Method: Micro Burner, Flame Height 45 mm A-2 Method: Meckel Burner, Flame Height 65 mm	Air Mix Burner: Flame Height 24 mm *Pressure of 3.92 kPa/hr
Timer	―	Heating Timer: Max. 999.9 sec Flaming: Max. 999.9 sec After-flame Timer: Max. 99999.9 sec After-glow Timer: Max. 99999.9 sec
Igniter	Automatic Ignition (Plug Method)	Automatic Ignition (Plug Method)
Accessories	Specimen Holder (A-1 and A-2 Method), Specimen Holding Coil (D Method), Flame Height Measuring Stand, Remote Control Button	Pearlite Plate, Specimen Holder
Power Source	AC 100 V, 1-Phase, 3 A, 50/60 Hz	AC 100 V, 1-Phase, 3 A, 50/60 Hz
Heat Source	Liquid Nitrogen Gas Type 2 No.4	Liquid Nitrogen Gas Type 2 No.4
Dimensions/ Weight (Approx.)	Tester Body: W420 × D330 × H940 mm, 22 kg Control Box: W370 × D300 × H220 mm, 9 kg	Tester Body: W560 × D330 × H940 mm, 25 kg Control Box: W370 × D300 × H220 mm, 9 kg

There are no reviews yet.

Note: you can call directly via zalo/phone number 0906 663 719 (Mr. Luan)