No.162-FS SLIP TESTER (HORIZONTAL METHOD)

JIS K7125、P8147、ASTM D3247、ISO 8295、TAPPI-T816

  • This tester is used to measure the friction coefficient of plastic film and paper according to the horizontal method.
  • The operator is to attach the test specimen to the sliding surface and sliding sled, then pull the sled with a metal wire that is connected to a load cell to acquire the static coefficient of friction and dynamic coefficient of friction.

Specification

Specifications are subject to change without notice.
Test Method Paper and Paperboard Plastic Film
Abrading Head W60 mm, L100 mm, Mass 1,000 g 63 × 63 mm (Abrading Surface 40 cm2)
Mass 200 ± 2 g (1.96 ± 0.02 N)
Flat Board W200 mm, L380 mm W200 mm, L380 mm
Specimen Surface: W100 mm, L250 mm
Sled: W60 mm, L120 mm		 W80 mm, L200 mm, T0.5 mm or Less
Friction Measuring Load Cell: Max. 10 N, 20 N, 50 N Load Cell: Max. 10 N, 20 N, 50 N
Speed 10.0 ± 0.2 mm/min 100 ± 10 mm/min or 500 ± 10 mm/min
Accessories ― Accessory Plate (Mass Less than 5 g)
Option Variable Speed Spec, Software, Recorder, Heating Plate Spec. Variable Speed Spec, Software, Recorder, Heating Plate Spec.
Power Source AC 100 V, 1-Phase, 5 A, 50/60 Hz AC 100 V, 1-Phase, 5 A, 50/60 Hz
Dimensions/ Weight (Approx.) W600 × D375 × H415 mm, 35 kg W600 × D375 × H415 mm, 35 kg

Reviews

There are no reviews yet.

Be the first to review “No.162-FS SLIP TESTER (HORIZONTAL METHOD)”