No.162-EW SLIP TESTER (FOR ENAMELED WIRE)

This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding.
Fix 2 specimens parallel to one another onto the Sled and Inclination Board.
Put the tension to 2 specimens on the board. Set the Sled on the Board, making each specimen get crossed when the Angle is 0°.
Measure the Angle when the Mass starts sliding while the Board gets inclining at a certain speed. Static Friction Coefficient will be calculation as tanθ from the measured Angle.

Specifications are subject to change without notice.
Model	No.162-EW	No.162-EWD
Sled	W120 mm, L120 mm, Mass 500 g	W120 mm, L120 mm, Mass 500 g
Inclination Angle	0 to 90° (Scale 0.2°)	0 to 90° (Scale 0.2°)
Inclination Speed	0.5°/s	0.5°/s
Option	Changeable Inclination Speed Spec	Changeable Inclination Speed Spec
Power Source	AC 100 V, 1-Phase, 3 A, 50/60 Hz (Motorized)	AC 100 V, 1-Phase, 5 A, 50/60 Hz
Dimensions/ Weight (Approx.)	W750 × D270 × H425 mm/ 30 kg	W750 × D270 × H425 mm/ 30 kg

There are no reviews yet.

Note: you can call directly via zalo/phone number 0906 663 719 (Mr. Luan)