No.455 45°繊維用燃焼性試験機

JIS A1322, L1091, L4404, Z2150

  • This tester is to used to test the flammability of textile products (curtains).
  • The A-1 (45° micro burner method) and A-2 (45° Meckel burner method) methods are to measure the degree of spread of the burn and the after-flame.
  • The D method is to measure the times it takes for the test specimen to completely burn out.
  • The tester can also be organized so that it can conduct the B method which is to measure the after-flame time and flaming distance.

Specification

Specifications are subject to change without notice.
Test Method Standard Spec B Method Spec
(Surface Flaming Test)
Specimen A-1 and A-2 Method: 350 × 250 mm
D Method: W100 mm, Mass 1 g
Attaching Angle: 45°		 220 × 400 mm
Burner A-1 and D Method:
Micro Burner, Flame Height 45 mm
A-2 Method:
Meckel Burner, Flame Height 65 mm		 Air Mix Burner: Flame Height 24 mm
*Pressure of 3.92 kPa/hr
Timer ― Heating Timer: Max. 999.9 sec
Flaming: Max. 999.9 sec
After-flame Timer: Max. 99999.9 sec
After-glow Timer: Max. 99999.9 sec
Igniter Automatic Ignition (Plug Method) Automatic Ignition (Plug Method)
Accessories Specimen Holder (A-1 and A-2 Method),
Specimen Holding Coil (D Method),
Flame Height Measuring Stand,
Remote Control Button		 Pearlite Plate, Specimen Holder
Power Source AC 100 V, 1-Phase, 3 A, 50/60 Hz AC 100 V, 1-Phase, 3 A, 50/60 Hz
Heat Source Liquid Nitrogen Gas Type 2 No.4 Liquid Nitrogen Gas Type 2 No.4
Dimensions/ Weight (Approx.) Tester Body:
W420 × D330 × H940 mm, 22 kg
Control Box:
W370 × D300 × H220 mm, 9 kg		 Tester Body:
W560 × D330 × H940 mm, 25 kg
Control Box:
W370 × D300 × H220 mm, 9 kg

Reviews

There are no reviews yet.

Be the first to review “No.455 45°繊維用燃焼性試験機”